Raymarine forum / Raymarine Forums / Multifunction Displays v / C120 -- Resetting Log

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C120 -- Resetting Log
06-27-16, 09:37 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: C120 -- Resetting Log
Carey,

In systems where a DSM30/300/250 w/fishinder transducer featuring a speed through water sensing component has been interfaced to the system, the Log data item may be reset by resetting the DSM (MENU->FISHFINDER SETUP->DSM RESET ) from a Fishfinder application page. After resetting the DSM, it will be necessary to configure the Select Transducer setting to match the model of transducer which has been interfaced to the DSM.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
C120 -- Resetting Log - Carey Cook - 06-23-16, 03:54 PM
RE: C120 -- Resetting Log - Carey Cook - 06-26-16, 01:35 PM
RE: C120 -- Resetting Log - Chuck - Raymarine - Moderator - 06-27-16 09:37 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication