The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / Time/Date jumping around

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Time/Date jumping around
06-29-16, 09:41 AM
Post: #1
Sunbow Offline
Junior Member
**
 		Posts: 5
Joined: Jun 2016
Reputation: 0
Time/Date jumping around
I just updated my Data Master e7 from 9.4 to the current Lighthouse.

Had problems getting the SeaTalk NG to Seatalk converters to update, but finally got all the system updated, including the AIS 650 and the RS130 GPS. I am attaching screenshots and data files for some of the error messages that I see now. (apparently the forum caps the number of attachments, let me know if you need anything else)

The Time/Date does not hold - I try to set it to 12 hour UTC-4, and then it jumps around to various different settings., including 0.3 and 0.8 offsets (??).

I also tried a power on reset, and then tried selecting the Data Source with the AIS650 unplugged from the converter, all to no avail.

What do I need to do to get this to work? It was all fine and OK with the 9.4 software.

John K
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Time/Date jumping around - Sunbow - 06-29-16 09:41 AM
RE: Time/Date jumping around - dkritter - 06-29-16, 04:14 PM
RE: Time/Date jumping around - Sunbow - 06-30-16, 08:50 AM
RE: Time/Date jumping around - Sunbow - 07-02-16, 11:34 AM
RE: Time/Date jumping around - Sunbow - 07-04-16, 07:43 AM
RE: Time/Date jumping around - Sunbow - 07-05-16, 11:39 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication