Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connecting older and newer MFDs with HS5 Switch
07-05-16, 12:21 PM
Post: #2
RE: Connecting older and newer MFDs with HS5 Switch
Welcome to the Raymarine Forum jimenet1,

Ethernet communications between these two generations of MFDs is not supported. While it would be possible to interface both MFDs as spurs to a powered and properly terminated SeaTalkng backbone, this interface will not support sharing of high bandwidth data such as cartography, radar imagery, fishfinder imagery, satellite weather, satellite radar, IP camera video, or thermal camera control. Sharing of such features would require that both MFDs be of the current generation of MFDs (i.e. a/c/e/eS/gS-Series MFDs).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Connecting older and newer MFDs with HS5 Switch - Chuck - Raymarine - Moderator - 07-05-16 12:21 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)