RNS 6.1 and 6.2 lockup on AIS connection lost

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

RNS 6.1 and 6.2 lockup on AIS connection lost

07-05-16, 07:43 PM

Post: #1

Sailor Brian Offline

Junior Member

Posts: 3
Joined: Mar 2016
Reputation: 0

RNS 6.1 and 6.2 lockup on AIS connection lost

I have continued to experience a lockup of RNS becoming "unresponsive" when an AIS target connection is lost. Half the time I can click on "OK" and there is no problem. The other half the system is locked and I have to restart both RNS and the instrument task. This has persisted since Windows 7 and continues with Windows 10.

Have you received similar reports? If so is there anything that can be done?

Thanks.

« Next Oldest | Next Newest »

Messages In This Thread

RNS 6.1 and 6.2 lockup on AIS connection lost - Sailor Brian - 07-05-16 07:43 PM

RE: RNS 6.1 and 6.2 lockup on AIS connection lost - Chuck - Raymarine - Moderator - 07-07-16, 01:46 PM

User(s) browsing this thread: 1 Guest(s)