AIS 650 problem when using auto pilot

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

AIS 650 problem when using auto pilot

07-21-16, 03:12 PM (This post was last modified: 07-22-16 08:52 AM by Chuck - Raymarine - Moderator.)

Post: #3

HiViet Offline

Junior Member

Posts: 18
Joined: Apr 2016
Reputation: 0

RE: AIS 650 problem when using auto pilot

Hello Chuck
I installed the latest version of software update:

GPM400 V4.66
Seatalk converter V2.01
AIS 650 V1.15

The NMEA 0183 port has the following equipment:
- VHF Ray240
- Airmar Weather Station PB150

Beside the problem between AIS that went silence or OFF when Autopilot in use, I also have a problem with the Ray240 VHF. The Ray240 never display DSC messages on chart plotter. I can see the DSC alarm message on the Ray240, but I didn't see anything on the display of the GPM400. The Ray240 did receive GPS information from GPM400. How do I test to see if the Ray240 transmit anything to the GPM400?

Thank you Chuck.
Viet

« Next Oldest | Next Newest »

Messages In This Thread

AIS 650 problem when using auto pilot - HiViet - 07-13-16, 07:52 PM

RE: AIS 650 problem when using auto pilot - Chuck - Raymarine - Moderator - 07-20-16, 02:16 PM

RE: AIS 650 problem when using auto pilot - HiViet - 07-21-16 03:12 PM

RE: AIS 650 problem when using auto pilot - Chuck - Raymarine - Moderator - 07-22-16, 09:03 AM

RE: AIS 650 problem when using auto pilot - HiViet - 07-22-16, 10:56 AM

RE: AIS 650 problem when using auto pilot - Chuck - Raymarine - Moderator - 07-22-16, 10:59 AM

RE: AIS 650 problem when using auto pilot - HiViet - 07-24-16, 01:28 PM

RE: AIS 650 problem when using auto pilot - Chuck - Raymarine - Moderator - 07-25-16, 09:52 AM

RE: AIS 650 problem when using auto pilot - HiViet - 07-25-16, 12:53 PM

RE: AIS 650 problem when using auto pilot - Chuck - Raymarine - Moderator - 07-25-16, 01:10 PM

User(s) browsing this thread: 1 Guest(s)