Raymarine forum / Raymarine Forums / Product Selection Assistance v / Does A68 require a CP100 so downvison sonar will work?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Does A68 require a CP100 so downvison sonar will work?
09-20-16, 11:35 AM (This post was last modified: 09-20-16 12:42 PM by Chuck - Raymarine - Moderator.)
Post: #9
firstlight38 Offline
Junior Member
**
 		Posts: 17
Joined: Aug 2016
Reputation: 0
RE: Does A68 require a CP100 so downvison sonar will work?
Chuck, thought I would give you an update. Seems as though just forward of my mini keels on the starboard side i have my depth/temp sensor. I am currently hauled for a bottom job and seems as though I can locate the sensor in the same position in the opposite hull. In that case it would be at 0 deg angle. It would just require a bit more wire to get back to the a128 mfd.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Does A68 require a CP100 so downvison sonar will work? - firstlight38 - 09-20-16 11:35 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication