Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] e97 touchscreen doesn't seem to have complete functionality
01-05-18, 10:12 AM (This post was last modified: 01-05-18 10:13 AM by Chuck - Raymarine - Moderator.)
Post: #6
RE: [CA] e97 touchscreen doesn't seem to have complete functionality
Reggie,

We're sorry to learn that your e97 MFD's touchscreen is not performing properly. It would accordingly be recommended that the MFD be sent to Raymarine’s Product Repair Center to be bench checked / serviced.

With regard to the MFD's GPS receiver, if interfaced to another MFD having a GPS receiver, or to an external GPS sensor, then the Data Master MFD's Data Sources feature must be utilized to specify which GPS source will be used by the system. Should the MFD be installed in a location affording it an unobstructed view of the skies overhead and be slow (>3 min) to acquire a GPS position FIX, produce a GPS position FIX with a high HDOP (> 1.2), intermittently drop position, or be unable to acquire a GPS position FIX, then it would be recommended that the MFD's GPS receiver circuit be inspected by Raymarine's Product Repair Center as well.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] e97 touchscreen doesn't seem to have complete functionality - Chuck - Raymarine - Moderator - 01-05-18 10:12 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)