I70 depth readings not true
|
08-15-16, 01:28 PM
Post: #1
|
|||
|
|||
I70 depth readings not true
In April of this year I installed an I70 System Pack (Wind Depth and Speed) along with an I70 Multi-functional Instrument Display and an ITC5 converter on my sailboat.
The speed and temp readings are good. The depth is not. Sometimes the accurate depth is shown on both Multi-functional Instrument Display and the chart plotter. Sometimes the depth readings bounce everywhere from 0 to high numbers on the Multi-functional Instrument Display. On my chart plotter the reading will be 6554 ft when the Multi-functional Instrument Display reads zero or close to it when we are in 30 feet of water. I checked and made sure both the Multi-functional Instrument Display and ITC5 have the latest software packages and they do. Any thoughts? Langley Gace |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
I70 depth readings not true - langley.gace@gmail.com - 08-15-16 01:28 PM
RE: I70 depth readings not true - Chuck - Raymarine - Moderator - 08-15-16, 02:30 PM
RE: I70 depth readings not true - langley.gace@gmail.com - 08-15-16, 02:42 PM
RE: I70 depth readings not true - Chuck - Raymarine - Moderator - 08-16-16, 09:01 AM
RE: I70 depth readings not true - langley.gace@gmail.com - 08-20-16, 03:05 PM
RE: I70 depth readings not true - Chuck - Raymarine - Moderator - 08-22-16, 10:10 AM
RE: I70 depth readings not true - langley.gace@gmail.com - 08-30-16, 02:01 PM
RE: I70 depth readings not true - Chuck - Raymarine - Moderator - 08-30-16, 03:54 PM
RE: I70 depth readings not true - Chuck - Raymarine - Moderator - 09-02-16, 07:51 AM
|
User(s) browsing this thread: 1 Guest(s)