Raystar 130 to E120
|
09-12-16, 01:03 PM
(This post was last modified: 09-12-16 01:04 PM by Chuck - Raymarine - Moderator.)
Post: #4
|
|||
|
|||
RE: Raystar 130 to E120
Don,
Have you updated the MFD's software to v5.69? Have you installed termination plugs within the two remaining blue backbone sockets of the SeaTalkng backbone created? Have you verified that the SeaTalkng backbone created has been powered from a switched 12VDC power circuit? Is the Raystar 130 GPS Sensor's LED illuminated? If so, what color is its LED? Has the GPS sensor been installed in a location affording it an unobstructed view of the skies overhead? |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Raystar 130 to E120 - dond - 08-23-16, 12:32 PM
RE: Raystar 130 to E120 - Chuck - Raymarine - Moderator - 08-23-16, 02:02 PM
RE: Raystar 130 to E120 - dond - 09-12-16, 12:19 PM
RE: Raystar 130 to E120 - Chuck - Raymarine - Moderator - 09-12-16 01:03 PM
RE: Raystar 130 to E120 - dond - 09-12-16, 04:24 PM
RE: Raystar 130 to E120 - Chuck - Raymarine - Moderator - 09-12-16, 04:28 PM
|
User(s) browsing this thread: 1 Guest(s)