The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / COG/SOG filter unavailable

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
COG/SOG filter unavailable
10-05-16, 10:28 PM
Post: #1
letpat Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2016
Reputation: 0
COG/SOG filter unavailable
I have a E97 MFD with external GPS150 from Digital Yacht connected to NMEA port 1 at 38400 Bauds. Sentences send by GPS are :

GGA/GLL/RMC/GSV/GSA/VTG/ZD at 1 Hz rate.

Internal GPS is disabled.

GPS works well. I can see its status with HDOP equals to 0.6.

My problem is the COG/SOG filter is unavailable (stay grey). I cannot select the level of this filter. So the course vector changes a lot with boat oscillations.

With internal GPS, this menu is available.

Why COG/SOG filter is unavailable with external GPS ?

Patrice
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
COG/SOG filter unavailable - letpat - 10-05-16 10:28 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication