Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Interfacing AIS650 with SPX10 and C70
03-04-16, 02:20 PM (This post was last modified: 03-24-16 12:52 PM by Chuck - Raymarine - Moderator.)
Post: #5
RE: Interfacing AIS650 with SPX10 and C70
Dave,

The equipment specified will only support a single source of GPS data within the system. The AIS650 will rely upon GPS data from its own internal GPS receiver w/external antenn, while the C70 will use GPS data from the SeaTalk, SeaTalkng (via SeaTalk to SeaTalkng Converter, or NMEA 0183 GPS Sensor which has been interfaced to the system. The AIS650 is not designed to function as a source of GPS data for the navigation system. Please ensure that you have not enabled the Output GNSS sentences from the AIS650 via the ProAIS2 software. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Interfacing AIS650 with SPX10 and C70 - Chuck - Raymarine - Moderator - 03-04-16 02:20 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)