Raymarine forum / Raymarine Forums / Multifunction Displays v / Yamaha command link engine ID problem

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Yamaha command link engine ID problem
11-30-16, 03:17 PM
Post: #16
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Yamaha command link engine ID problem
Bill,

In support of your claim that the V16 software in conjunction with the last ECI-100 software update did not suffer the reported issues with engine data from your dual engine Command Link system, I have provided links to the v16.47 and previous ECI-100 software update below.

Note: the last software update for the ECI-100 (v1.20) was released in August 2015 and as such would have been expected to have been installed within the ECI-100 when v16.47 was running in your MFD.

- a/c/e/eS/gS-Series MFD v16.47

- ECI-100 v1.12
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Yamaha command link engine ID problem - Chuck - Raymarine - Moderator - 11-30-16 03:17 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication