European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Autopilots 
/
S1G Fluxgate Compass Alignment Drifts - Use External Compass?
/
S1G Fluxgate Compass Alignment Drifts - Use External Compass?
|
S1G Fluxgate Compass Alignment Drifts - Use External Compass?
|
|
11-21-16, 11:14 AM
Post: #2
|
|||
|
|||
|
RE: S1G Fluxgate Compass Alignment Drifts - Use External Compass?
Welcome to the Raymarine Forum Bill,
The data rate for heading on the SeaTalk, not to be confused with SeaTalkng, bus is 1Hz. Accordingly, a SeaTalk source of heading data would be too slow for the S1G. In this case, it would be recommended that - the fluxgate compass be disconnected (all leads) from the S1G - the 4800 BAUD NMEA 0183 10Hz output (heading-only) of the third party heading source be interfaced to the S1G's NMEA 0183 input port 1. - should drift continue to be observed, then the S1G's gyro should be unplugged from the S1G's circuit board. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
S1G Fluxgate Compass Alignment Drifts - Use External Compass? - Bill Kneller - 11-20-16, 05:44 PM
RE: S1G Fluxgate Compass Alignment Drifts - Use External Compass? - Chuck - Raymarine - Moderator - 11-21-16 11:14 AM
|
User(s) browsing this thread: 1 Guest(s)