ST50 Wind Display Testing Procedure

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Jordan,

Please click here to view a FAQ addressing this subject. The procedure for testing a ST50 Masthead Wind Transducer is the same as that specified for the masthead transducer which has been designed for use with Raymarine's iTC-5, i60 Wind Instrument, and ST60 Wind Instrument products. Unfortunately, should the ST50 wind transducer or the ST50 Wind Instrument have been determined to have suffered a failure, then both the wind transducer and wind instrument would need to be replaced, as
- ST50 wind transducers are not compatible with Raymarine's iTC-5 or i60 Wind Instrument
- ST50 instrument displays are not compatible with Raymarine's currently manufactured E22078 and E22079 wind transducers.

Raymarine has not designed a test for the ST50 Wind Instruments, as these instruments would have typically been tested with a transducer which was known to be operational.