Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EV-1 location
10-30-17, 09:39 AM
Post: #12
RE: EV-1 location
jegnew,

When uncertain about the suitability of a proposed mounting location, it is recommended that the device be installed in a temporary manner which would then permit testing of the product's performance in that location without committing to drilling holes and chasing cables. Industrial Velcro, zip ties, etc. can be valuable products for such temporary installations. You may also want to consider running cables outside of chases until the proposed installation location has been verified to be suitable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
EV-1 location - DFMott - 12-12-16, 12:42 PM
RE: EV-1 location - DFMott - 12-12-16, 02:50 PM
RE: EV-1 location - jegnew - 10-04-17, 07:13 AM
RE: EV-1 location - jegnew - 10-11-17, 12:51 AM
RE: EV-1 location - jegnew - 10-28-17, 12:29 AM
RE: EV-1 location - jegnew - 10-30-17, 09:16 AM
RE: EV-1 location - Chuck - Raymarine - Moderator - 10-30-17 09:39 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)