Raymarine forum / Raymarine Forums / Instruments v / Seatalk2 to STng

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Seatalk2 to STng
12-23-17, 10:28 AM
Post: #15
tgsail1 Offline
Junior Member
**
 		Posts: 8
Joined: Nov 2017
Reputation: 0
RE: Seatalk2 to STng
Chuck-Thanks for the clarification. Given the last comment about the preference for an STNG data bus, I'm now considering using an ITC-5 and using the i70 for wind. As you saw earlier, my original instruments and transducers were st50/st60 generation. The wind transducer might be from the st50 generation (I can't tell from looking at it), but it is currently functioning normally with an st60 wind instrument. I believe it will work on the ITC-5, but am not certain because of some language in the manual. If it works on the st60 will it work on the itc-5?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Seatalk2 to STng - Kevin - 12-12-16, 03:03 PM
RE: Seatalk2 to STng - Kevin - 06-26-17, 01:19 PM
RE: Seatalk2 to STng - Kevin - 06-27-17, 07:20 AM
RE: Seatalk2 to STng - Kevin - 06-28-17, 06:32 AM
RE: Seatalk2 to STng - tgsail1 - 12-01-17, 10:22 AM
[CA] RE: Seatalk2 to STng - tgsail1 - 12-04-17, 10:58 PM
RE: Seatalk2 to STng - tgsail1 - 12-08-17, 12:18 PM
RE: Seatalk2 to STng - tgsail1 - 12-23-17 10:28 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication