Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ray 70 Interface with E-120 Classic
08-13-17, 05:17 PM
Post: #3
RE: Ray 70 Interface with E-120 Classic
Since my last post I have added an AIS 650 to my system. It is connected via STng and NMEA0183. STng so my i70 can see the data and the 0183 so my Ray218 can receive GPS data from my E-120 Classic. I noticed from the Ray70 manual that it can receive external GPS data via the STng bus but it does not transmit GPS data it has received via its internal receiver on the STng bus nor via 0183. My plan is to drop the 0183 interface when I add the Ray70 so everything is on the STng (except the RayStar 130 that interfaces via Sea Talk to the E-120 Classic). Since the E-120 Classic will output GPS data onto the STng are there any restrictions on Ray70 having its GPS receiver on and probably receiving RayStar130 derived GPS data and internally derived GPS data. I use my EV-1 ACU to power the bus and it is located about midpoint on the bus.
Thanks in advance
Tim
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Ray 70 Interface with E-120 Classic - Tim_Dahlin - 08-13-17 05:17 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)