Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E80 Classic and Evolution Autopilot
03-27-17, 08:52 AM
Post: #2
RE: E80 Classic and Evolution Autopilot
Welcome to the Raymarine Forum

Q. I have an E80 Classic that is hooked directly to my DSM300 through the Seatalkhs port. I also have an S1000 autopilot that I'd like to upgrade to an Evolution autopilot. I believe the Evolution autopilot could use the Seatalkhs port that the DSM300 is currently using,
A. It is not possible to interface an Evolution autopilot to an Ethernet (SeaTalkhs) network. The E-Series Classic MFD and Evolution autopilot components will each be interfaced as individual spurs to a powered and properly terminated SeaTalkng backbone. Raymarine offers the A06061 / 4.92in (1.5m) E-Series Classic MFD to SeaTalkng Spur cable to permit the MFD's SeaTalk2/NMEA 2000 socket to be interfaced as a spur to a SeaTalkng backbone. The E-Series Classic MFD will additionally need to be updated with E-Series Classic MFD v5.69 software.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: E80 Classic and Evolution Autopilot - Chuck - Raymarine - Moderator - 03-27-17 08:52 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)