The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Communications v / RAY55 VHF and Remote Mike

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RAY55 VHF and Remote Mike
03-04-16, 10:33 AM
Post: #1
N1ml Offline
Junior Member
**
 		Posts: 7
Joined: Feb 2016
Reputation: 0
RAY55 VHF and Remote Mike
I have a setup using a RAY55 VHF radio wired to the remote handset. Sometimes the display on the remote comes up blank. Yesterday, I shut of the main battery house power switch and turned off the VHF. Then I turned on main power, turned on the VHF and the remote display came up blank. I disconnected the remote and called it a day.
This morning I plugged in the remote and turned on the house power. I turned on the VHF and all worked perfectly.
I turned everything off. I unplugged the mike then plugged it back in. I turned all back on and the display was blank.
This has all happened on prior outings. Is there a proper sequence or is there a setting I may have wrong. In my opinion there seems to be a communication data error in the interface.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RAY55 VHF and Remote Mike - N1ml - 03-04-16 10:33 AM
RE: RAY55 VHF and Remote Mike - N1ml - 03-04-16, 07:08 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication