The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / Is Realvision 3D transom-mount transducer reversible?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Is Realvision 3D transom-mount transducer reversible?
04-22-17, 03:11 AM
Post: #1
Solandri Offline
Junior Member
**
 		Posts: 3
Joined: Apr 2017
Reputation: 0
Is Realvision 3D transom-mount transducer reversible?
The gap between my sterndrive leg and transom is too narrow for the length of the RV-100 transom-mount Realvision 3D transducer. My bottom is not flat so a single thru-hull transducer will not work. I would like to avoid the cost of a port/starboard pair of thru-hull transducers.

Would it be possible for me to create a fairing underneath the transom and mount the RV-100 transducer backwards? This would reverse left/right and the direction of travel that the transducer sees. Does the Axiom MFD have a setting to compensate for this so the sonar images show up with the correct orientation?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Is Realvision 3D transom-mount transducer reversible? - Solandri - 04-22-17 03:11 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication