Raymarine EV100/150

[Chuck - Raymarine - Moderator]

Q1. A 12" touch with buttons MFD Screen with N.America Navionics (Need a part number). Both standard 50/200 transducer and Chirp/ Downvison sonar.

A1. Should this be the case, then
- E70284-NAG eS127 12.1" MFD 600W SONAR - N AMER NAVIONICS+
- E70205 CP100 DownVision Fishfinder and Transom Mount CPT-100 Depth & Temp CHIRP Transducer Pack
- an appropriate length of RayNet (F) to RayNet (F) Cable to interface the MFD to the CP100


Q2. I understand the EV150 comes with a starter kit but if any other components are needed given what I have listed above please suggest.

A2. Did you click on the link to the FAQ provided within my previous response addressing how to add spur sockets to the SeaTalkng backbone to permit additional devices (i.e. the MFD) to the backbone. In short you will need an additional SeaTalkng T-Piece or SeaTalkng 5-Way Connector and an appropriate length of SeaTalkng Backbone Cable to interface T-Piece or 5-Way Connector to the backbone created for the autopilot. You will additionally need an appropriate length of SeaTalkng Spur Cable to connect the MFD's SeaTalkng spur socket to the spur socket of the aforementioned SeaTalkng T-Piece or SeaTalkng 5-Way Connector.