The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
a98 CPT 100, bottom view,
05-04-17, 05:41 PM
Post: #1
a98 CPT 100, bottom view,
Hello, I have a a98 with a transom mount CPT100, On other Raymarine MFDs I was used to using 50kHz and 200kHz with a thru hull transducer
Using 50kHz, the view of the bottom, the radius from transducer, 20'-30', at 100ft depth 50'-60'. Using 200kHz 50' depth radius from transducer, 2.5-3', total area seen, 5'-6', at 100 ft depth, radius from transducer 3'-6' total area of bottom seen 6'-12' I go diving and spearfishing so knowing this information is important. I knew at 100' and 200kHz what I was looking at was directly under the boat or within a few feet.
However on this MFD there is no adjustment. So when I am looking at either Chirp Sonar or Chrip Downvision, What area am I looking at at the bottom? If the depth is 100 ft, how narrow of scope on the bottom is the cone?
Thanks!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
a98 CPT 100, bottom view, - No Free Rides - 05-04-17 05:41 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)