The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EV 100 connected to Garmin NMEA 2000 network
05-05-17, 07:49 AM (This post was last modified: 05-05-17 09:13 AM by Chuck - Raymarine - Moderator.)
Post: #1
EV 100 connected to Garmin NMEA 2000 network
I have recently purchased and installed a EV 100 which replaced a 4000+ autopilot. I have Garmin chart plotter, windspeed/direction and boatspeed/depth instruments on a NMEA 2000 network. I have seen on this forum that there is a problem with getting track info from the Garmin chartplotter system. Its not just the chartplotter but all instruments. When I go to the device list on the Raymarine display it shows "No device connected" for every menu option.The display stills shows the wind speed/water speed/depth but not any track info. Since I don't own a Raymarine MFD I have read that I have to uninstall the three autopilot devices, send them into Raymarine and have the software downgraded then re-install the system. Is the software that is being worked on to fix this problem expected in a month or is it going to be something that requires 6 months or more to work out. I know this is difficult to estimate, but just a rough idea would be nice. I can either wait for the fix and uninstall/re-install once or have to do it twice.

Thanks
Chris
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
EV 100 connected to Garmin NMEA 2000 network - nanchris - 05-05-17 07:49 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)