Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Radar replacement
05-09-17, 10:47 AM (This post was last modified: 05-09-17 10:48 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Radar replacement
Welcome to the Raymarine Forum flbluerunner,

Fortunately, E-Series Classic MFDs which have been updated with the final E-Series Classic MFD software update (v5.69) are compatible with Raymarine's HD and SuperHD Open Array Radar systems. These systems are available with either 4' or 6' arrays and choice of power output. In this case, it would be recommended that a T70175 12kW HD Color 6' Open Array Radar system and appropriate length of Digital Radar Cable be purchased. Should the vessel be fitted with a SeaTalkhs Network Switch, then the Digital Radar Cable may be adapted to be mated one of the switch's RJ45 (F) sockets via an assembly constructed from an A80162 RayNet (M) to RayNet (M) Cable Joiner and an appropriate length of RayNet (F) to RJ45 (M) Cable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Radar replacement - flbluerunner - 05-07-17, 11:03 AM
RE: Radar replacement - Chuck - Raymarine - Moderator - 05-09-17 10:47 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)