Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom Axiom ohhhh Axiom
05-12-17, 11:07 AM (This post was last modified: 05-15-17 09:16 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: Axiom Axiom ohhhh Axiom
Thanks for all the fantastic info!!!

Okay...Still a tad confused, but getting closer:

Here are my devices and how I currently have them set-up (Not powered yet)

Axiom 9 MFD x 2
#1 is dedicated to Sonar and will be connected to the Transducer
#2 is dedicated Radar/Chartplotter and will be hardwired to the Quantum Radome

EM-Track B100 AIS Transceiver

RS150 GNSS Receiver

Yamaha Command Link+ Interface connected to the NMEA2K net via a yamaha cable

Fuel Flow Sensor

Fuel Level Sensors x 2

I also have a older ICOM VHF which has network capability, likely the older style.

Lastly I have an older A series MFD I will use as a back-up MFD/Chartplotter. It can be stand alone.

Here is my Big remaining questions:

1. What do I get if I add a HS5 RayNet Network Switch? Since I am utilizing a NMEA2K Backbone and most of my devices are connected via that network, do I even need to go to RayNet for anything? All of my devices are NMEA2K compatible.

2. Engine Data. I have the Yamaha NMEA2K Interface (Proprietary) installed already...Do I need the EC100 as well?
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
Axiom Axiom ohhhh Axiom - Randar - 05-08-17, 08:04 PM
RE: Axiom Axiom ohhhh Axiom - Randar - 05-12-17 11:07 AM
RE: Axiom Axiom ohhhh Axiom - Randar - 05-15-17, 09:39 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)