Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom ?'s
06-16-17, 04:44 PM (This post was last modified: 06-20-17 08:01 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: Axiom ?'s

Thanks for the good info.

Just to clarify, if I connected a "smart" transducer, such as the DST 800 to my nmea 2000 network, the axiom (70366) would indeed display depth... and then I could always later add a depth instrument such as the i50, as you suggested, in order to take advantage of some of the calibration and alarm functions you outlined.

Also, does Raymarine produce a right angle connector suitable for the axiom nmea 2000 connection? I couldn't find one on your site. I understand this is not a seatalkng connection ( I don't understand why...), so I could use a cable from any manufacturer? Then a simple adapter to the ng backbone...

Thanks again!

Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
Axiom ?'s - DaveE - 06-09-17, 08:13 PM
RE: Axiom ?'s - DaveE - 06-16-17 04:44 PM
RE: Axiom ?'s - DaveE - 06-20-17, 12:58 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)