Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Updating: Ray230 to Ray260
06-14-17, 12:49 PM
Post: #2
RE: Updating: Ray230 to Ray260
Welcome to the Raymarine Forum FPCJR2,

As the Ray260 also features a NMEA 0183 communications interface, the NMEA 0183 input leads of this interface would need to be interfaced to a source of GPS data supporting NMEA 0183 communications. Two such sources of GPS data from the equipment period specified would be the NMEA 0183 output leads of a C/E-Series Classic MFD's MFD NMEA 0183 Cable or the NMEA output leads of a hsb/hsb2/Pathfinder Series Display's NMEA 0183 Output Cable. Should a C/E-Series Classic MFD be installed onboard and should you additionally desire to have the MFD be able to create waypoints using the coordinate provided within DSC position reports, then it would additionally be recommended that the the NMEA 0183 output leads of the Ray260 be interfaced to the NMEA 0183 input leads of the MFD NMEA 0183 Cable of a C/E-Series Classic MFDs.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
Updating: Ray230 to Ray260 - FPCJR2 - 06-13-17, 12:29 AM
RE: Updating: Ray230 to Ray260 - Chuck - Raymarine - Moderator - 06-14-17 12:49 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)