The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.3.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error

Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ray60 not getting position data
07-18-17, 08:15 AM (This post was last modified: 07-18-17 08:18 AM by Chuck - Raymarine - Moderator.)
Post: #1
Ray60 not getting position data
I am hoping to get some help diagnosing the lack of position data getting to my new Ray60. I have a C80 Classic MFD so my interface is NMEA0183 direct from the C80 to the Ray60.

My connection is as follows:

C80 Out+ Yellow ----- VHF IN+ Yellow
C80 Out- Brown ----- VHF IN- Green

The C80 DSC output is set to NMEA 4800 baud rate and the VHF input is also set at Standard Speed.

Are there any additional settings in either the C80 or the Ray60 that I should try? Any other suggestions?


Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
Ray60 not getting position data - ddfour1 - 07-18-17 08:15 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)