The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST2000+ / A50 Chartplotter Connection
07-30-17, 12:41 AM
Post: #1
ST2000+ / A50 Chartplotter Connection
I am trying to get my ST2000+ to talk to my Raymarine A50 chartplotter via a sea talk ng connection in conjunction with my ST60+ tri data. I have the ST2000+ seatalk cable hooked into the ST60+ then I have the converter cable to hook the ST60+ into my seatalk ng network which the A50 is plugged into.

So a few items:

I get all the info from the ST60+ tri data to show up on my A50.

I get SOG data from the A50 on the ST60+

When I run the Tiller pilot I get the red heading vector from the tiller pilot to show up on th A50 (I can spin the tiller pilot on its mount and the red vector line changes) therefore there is a connection.

What I can't get is the tiller pilot to show up on the screen as connected (the pilot symbol on the A50 screen has a line through it). I also am unable to steer to a waypoint with the tillerpilot since when I hit the -10 and +10 button while in Auto mode it just beeps and nothing happens.

Any help would be appreciated!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ST2000+ / A50 Chartplotter Connection - miacuelli - 07-30-17 12:41 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)