Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom/SPX 5
09-19-17, 07:33 AM (This post was last modified: 09-19-17 01:16 PM by Chuck - Raymarine - Moderator.)
Post: #6
RE: Axiom/SPX 5
Lighty,

As indicated within the Software History section of the Axiom MFDs LightHouse 3 (LH3) Software Update web page, the LH3 v3.2.86 software update added the "Ability to upgrade STng Peripherals" using "all STng ISO files currently online". Unfortunately, Raymarine has not yet added support for updating legacy STng peripherals which were not designed to be updated via ISO files (as are currently manufactured Raymarine devices featuring a SeaTalkng / NMEA 2000 communications interface). Raymarine's program management will be reminded of needs for this capability for customer owning legacy STng peripherals. As indicated within my initial response to this thread, should one desire to update the software within the autopilot components prior to the release of Axiom MFD software supporting updates to legacy STng peripherals, then it would be recommended that those peripherals be updated by a Certified Raymarine Installer, brought to your Raymarine dealer (recommend prior contact with the dealer to verify that the dealer can perform this service), or sent to Raymarine’s Product Repair Center to be to have the software updated within these devices.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Axiom/SPX 5 - Lighty - 08-01-17, 02:39 PM
RE: Axiom/SPX 5 - Lighty - 08-02-17, 12:34 PM
RE: Axiom/SPX 5 - Lighty - 09-19-17, 07:15 AM
RE: Axiom/SPX 5 - Chuck - Raymarine - Moderator - 09-19-17 07:33 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)