The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / C80 Software Update

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C80 Software Update
08-01-17, 04:56 PM
Post: #1
Birdman Offline
Junior Member
**
 		Posts: 8
Joined: May 2017
Reputation: 0
C80 Software Update
I've not had any success updating my C80 to v5.16. I was able to get part of the upgrade done but it fails with an "Error Checksum failed - Upgrade package is corrupt" message.

I then tried an older v4 upgrade with the same issue.

Are there CF card format issues/brands to be aware of? I tried reformatting the card and was not even then able to get the plotter to see the card w/ the downloaded software on it.

Any advice (short of sending the C80 back to Ray) would be awesome ! My goal is to get updated charts which I can't get w/o the software update.

One other question - on my satellites page, the display does not show any satellites but yet I have a fix and the unit works fine. I'm thinking this is all related to the software being old.

Thanks,
Birdman
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
C80 Software Update - Birdman - 08-01-17 04:56 PM
RE: C80 Software Update - Birdman - 08-02-17, 02:30 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication