The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom 7 RV Software update 3.1.96 issue
08-16-17, 07:33 PM
Post: #1
Axiom 7 RV Software update 3.1.96 issue
I have an Axiom 7 RV that was running 3.0.60. I have an older BV744 transducer plugged directly into the Axiom using an adapter cable. I had no problems configuring it and getting it to work correctly. When I up dated the software to 3.1.96, I am having problems configuring the transducer. In the Sonar settings --> transducer page, it says "NONE" so I cannot set the Below Keel/Below Waterline/Below Transducer setting. I've tried selecting different transducer on initial set up, but that page always says "NONE" I am able to see the Sonar Display and depth, so I know it is recognizing the Transducer. I re-installed the older software 3.0.60 and the transducer page is displaying the info so I can configure the depth. So at this point in time, I'm stuck with the 3.0.60 version. Any suggestions? Thanks in advance.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Axiom 7 RV Software update 3.1.96 issue - jmcjmc817 - 08-16-17 07:33 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)