Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
System add on
11-16-17, 09:55 AM
Post: #11
RE: System add on
Theman772,

You do not have all of the devices required to network the components which you have listed. The Ethernet Network (RayNet) socket of the two MFDs within you system will permit a total of three compatible devices having an Ethernet communications interface to be networked without need for an Ethernet network switch. However, you have listed four compatible devices within your system having an Ethernet communications interface (i.e. a128 MFD, a78 MFD, radar transducer w/Digital Radar Cable, and the CP450C. Accordingly, it would be necessary to install a HS5 RayNet Network Switch within your system. As a best installation practice, it would then be recommended that each of the four compatible devices within your system having an Ethernet communications interface instead be interfaced to the HS5 RayNet Network Switch via an an appropriate length of RayNet (F) to RayNet (F) Cable. The Digital Radar Cable may be directly connected to the HS5 RayNet Network Switch.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
System add on - Theman772 - 09-16-17, 09:19 AM
RE: System add on - Theman772 - 09-20-17, 06:14 PM
RE: System add on - Theman772 - 09-21-17, 09:03 AM
RE: System add on - Theman772 - 10-18-17, 06:59 PM
RE: System add on - Theman772 - 11-15-17, 05:16 PM
RE: System add on - Chuck - Raymarine - Moderator - 11-16-17 09:55 AM
RE: System add on - Theman772 - 11-16-17, 08:31 PM
RE: System add on - Theman772 - 12-03-17, 10:57 PM
RE: System add on - Theman772 - 12-14-17, 08:50 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)