Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sonar selection
09-26-17, 10:27 AM
Post: #2
RE: Sonar selection
Welcome to the Raymarine Forum Gmcc,

As much as 20% of a in-hull transducer's energy / sensitivity may be lost in transmission / reception through the hull's material. Accordingly, transducers which are in direct contact with the water (i.e. thru-hull and transom mounted transducers) will generally provide the greatest fishfinding performance. The ax7/cx7/e7D/ex7/eSx7 MFDs are each compatible with any of the 600W 50kHz / 200kHz transducers found here. Should greater power or CHIRP sonar features be desired, then the MFD may instead be interfaced to a CP370 w/]compatible 1kW transducer[/url or CP470/CP570 w/[url=http://www.raymarine.com/view/?id=12414]compatible CHIRP transducer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Sonar selection - Gmcc - 09-25-17, 03:34 PM
RE: Sonar selection - Chuck - Raymarine - Moderator - 09-26-17 10:27 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)