The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Axiom 12 constantly in reboot, won't fully boot

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom 12 constantly in reboot, won't fully boot
09-27-17, 04:18 PM (This post was last modified: 02-02-18 11:09 AM by Chuck - Raymarine - Moderator.)
Post: #1
JLeon77 Offline
Junior Member
**
 		Posts: 3
Joined: Jul 2017
Reputation: 0
[CA] Axiom 12 constantly in reboot, won't fully boot
I have a pair of Axiom 12's at the dash and bow respectivley. The bow unit will not boot up, it just keeps cycling through the boot up. I got it up long enough to run the software update, but now it just keeps cycling. Dash unit is working fine. I went through the troubleshooting and did a hard reset to factory and it still is happening. It is connected to the bow power switch and it is responding when that switch is toggled, but it won't completely boot up.

Any ideas what could be causing this? I want to check my options before reaching out to make a warranty claim.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Axiom 12 constantly in reboot, won't fully boot - JLeon77 - 09-27-17 04:18 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication