Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EV1 Housing Part #
10-30-17, 10:13 AM
Post: #2
RE: EV1 Housing Part #
Welcome back to the Raymarine Forum PetrelMarine,

Raymarine has produced the EV-1/2 CCU mounting bracket in two versions. Initially, the mounting bracket was produced with snap-locking tabs for its cover. Due to complaints of customers breaking the cover's tabs during disassembly, the mounting bracket was redesigned. The current version of the EV-1/2 CCU mounting bracket feature a cover which is removed by rotating the cover counterclockwise and then lifting the cover off. As the bracket is designed to be mounted to a vertical bulkhead, it may be necessary to remove or loosen the lower bracket to permit clearance to rotate the bracket's cover.

The current part number for the EV-1/2 CCU mounting bracket is A80437.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
EV1 Housing Part # - PetrelMarine - 10-29-17, 01:28 PM
RE: EV1 Housing Part # - Chuck - Raymarine - Moderator - 10-30-17 10:13 AM
RE: EV1 Housing Part # - PetrelMarine - 10-31-17, 10:31 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)