Raymarine forum / Raymarine Forums / Instruments v / ST290 Display (E22056)

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST290 Display (E22056)
12-04-17, 11:18 AM
Post: #6
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: ST290 Display (E22056)
Hi,
Updated drawing is good to go.
With regards topower to the vhf, you will still need main power - so leave it connected. The STng network needs its own 12v power and other than supplying power to the instrument displays and GPS antenna, all other peripherals still need their main power, e.g. AIS, Autopilot, MFDs, sonar modules.

If your GPS just plugs into SeaTalk, then just leave it plugged intoSeaTalk and the Converter will pick up that data and transpose it onto STng.
Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ST290 Display (E22056) - ddfour1 - 11-30-17, 11:28 AM
RE: ST290 Display (E22056) - ddfour1 - 12-01-17, 02:14 PM
RE: ST290 Display (E22056) - ddfour1 - 12-04-17, 11:02 AM
RE: ST290 Display (E22056) - Derek - Raymarine - Moderator - 12-04-17 11:18 AM
RE: ST290 Display (E22056) - ddfour1 - 12-05-17, 09:52 AM
RE: ST290 Display (E22056) - ddfour1 - 12-05-17, 03:39 PM
RE: ST290 Display (E22056) - ddfour1 - 12-06-17, 10:55 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication