[CA] GPS coordinates lost on Ray50

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum nharrison5,

When a system features more than one source of any specific type of data (ex. GPS, wind, speed (STW), depth, etc.), then MFD's Data Sources feature (HOME->SET-UP->SYSTEM SETTINGS->DATA SOURCES) must be used to specify which source will be used for each type of data for which more than one source is present within the system. In this case, the Data Sources feature must be used to specify that the Ray150 GPS Sensor will serve as the system's GPS data source (recommend the Manual source selection option). Failure to perform this specification may result in the symptom which you have reported.