[CA] Type 150/400 course computer
|
12-28-17, 04:21 PM
(This post was last modified: 12-29-17 08:51 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA] Type 150/400 course computer
I have multiple questions but I think they have the same answer. First, I was wandering if it is posible to get the rudder info from my raymarine type 150/400 course computer and send it to my coastal exploerer using one of the nmea 183 outputs (RSA Rudder Sensor Alignment).
Second, could I use nmea 183 (GGA Golbal positioning data) and send it to the couse computer which is connected to my sea talk - since I have the dreaded NO FIX on my raymarine RL80C Pathfinder. (I think it's due to a broken Raystar 120) I have satrted a nmea 183 - 2000 backbone with a computer (coastal exploerer) and have it talking to the ST6001 autopilot via (nmea in). I can create a route on costal ex and the course computer will track and follow. I have GPS just not in the sea talk part of my system. Thanx Darin |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA] Type 150/400 course computer - Darin - 12-28-17 04:21 PM
RE: [CA] Type 150/400 course computer - Chuck - Raymarine - Moderator - 12-29-17, 08:50 AM
RE: [CA] Type 150/400 course computer - Darin - 12-29-17, 02:23 PM
RE: [CA] Type 150/400 course computer - Chuck - Raymarine - Moderator - 12-29-17, 05:28 PM
|
User(s) browsing this thread: 1 Guest(s)