The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] AXIOM Pro Micro SD Cards

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] AXIOM Pro Micro SD Cards
01-10-18, 01:08 PM (This post was last modified: 01-10-18 03:03 PM by Chuck - Raymarine - Moderator.)
Post: #1
jkspain Offline
Junior Member
**
 		Posts: 37
Joined: Apr 2017
Reputation: 0
[CA] AXIOM Pro Micro SD Cards
I have an AXIOM Pro 12 RVX unit installed in my system and have a question about Micro SD card compatibility.

The existing Navionics Platinum+ Chart Micro SD is a SDSC 8 GB chip in slot 1 (upper slot). I put a SanDisk Micro SDXC 64GB in Slot 2 (for video recording and snapshots) but the AXIOM camera configuration menu said Slot 2 was (empty). I powered off the AXIOM, reversed the two chips, powerd on, confirmed the Nav Charts worked, and checked the camera configuration menu. Now it said Slot 1 (the slot with with SDXC chip) was empty.

The Lighthouse 3 manual says the SDXC should be compatible but I am thinking maybe not?? Please clarify.

Thanks,

Jon
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] AXIOM Pro Micro SD Cards - jkspain - 01-10-18 01:08 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication