Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] C90W Upgrade to Axion Pro with 3D Imaging
02-26-18, 12:43 PM (This post was last modified: 02-26-18 04:01 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA] C90W Upgrade to Axion Pro with 3D Imaging
Chuck thanks for you reply.
Q3 answer. Yes I would be removing the Airmarb 60-12 transducer and replace with the RV-312 with 12 degrees. Current one is about 12 inches back from transom.
Talked to a person who had a three D imaging tru hull transducer installed on his TW and it worked.

My next decision is what do I do with the C90W. I was thinking on using it for just the radar system. I could also buy two 9 inch Axions units, (remove C90W and DSM 30) and have the one just for the radar. What would be your recommendation for a system that would function well together. I have room on the dash to add another unit in. So it would be the one Axion Pro with the C90W or two 9 inch Axion.
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: [CA] C90W Upgrade to Axion Pro with 3D Imaging - Wlaks - 02-26-18 12:43 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)