The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.3.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error

Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] E80-VHF DSC Ray54e-Ais
03-09-18, 12:44 PM (This post was last modified: 03-09-18 01:44 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] E80-VHF DSC Ray54e-Ais
2x E80 classic plotters (charttable and outside, connected to eachother by ST highspeed)
Raymarine vhf dsc Ray 54e
Raymarine gps antenna
Autopilot st 6001(i think this model)
Radar Raymarine

I would like to add a Ais transponder. (thirdparty: watcheye (gps included))

The 0183 port on both E80's are already used (charttable E80: for VHF and GPS antenna, E80 at helm: no idea what is hooked up here)

Q1/Can i just simply put the ais transponder in between the radio and E80?
I will have to change Baudrate of the nmea 0183 port to 38400.

Q2/How will the plotter talk to the ray 54e vhf? (you should be able to call a mmsi/ais directly from E80 screen i think?)

Q3/ would it be easier/better to add a RM AIS 650 or similar problem? (no gps included)
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[CA] E80-VHF DSC Ray54e-Ais - TimDV - 03-09-18 12:44 PM
RE: [CA] E80-VHF DSC Ray54e-Ais - TimDV - 03-09-18, 02:31 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)