The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] Axiom 7, eS78, VHF, Quantum Setup

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom 7, eS78, VHF, Quantum Setup
03-12-18, 04:09 PM (This post was last modified: 03-14-18 01:52 PM by Chuck - Raymarine - Moderator.)
Post: #1
jdiaso Offline
Junior Member
**
 		Posts: 3
Joined: Mar 2017
Reputation: 0
[CA] Axiom 7, eS78, VHF, Quantum Setup
I currently have an eS78 and Quantum Radar (wifi) setup. With a Westmarine 585 VHF connect to the eS78, by a Raymarine Es7X Series Video In/Nmea0183 Cable, for GPS data.

I will be adding a Axiom 7 (E70365-03-NAG) in the spring. The Axiom will be set as the data master. But I have a couple of question regarding the setup.

1) Do I update the eS78 and Quantum to Lighthouse 3.3 before I connect it to the Axiom? Or do I use the Axiom to update the eS78 & Quantum?

2) If the Axiom is set as the data master will the VHF still received GPS data, over the Raymarine Es7X Series Video In/Nmea0183 Cable, from the eS78?

3) Should the Quantum be moved to the Axioms' Wifi?

4) Will I still be able to use the CPT-100 that is connected to eS78? on both the Axiom and eS78?

5) Should both MFD's Be connected to the NMEA 2000 backbone?

I have attach a diagram.

Thanks

Jack


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Axiom 7, eS78, VHF, Quantum Setup - jdiaso - 03-12-18 04:09 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication