Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] deep water and cp200
03-15-18, 11:09 AM (This post was last modified: 03-15-18 11:10 AM by Chuck - Raymarine - Moderator.)
Post: #4
RE: [CA] deep water and cp200
Sallysea,

Our experience has found that when the CPT-200's elements are located in the middle position of the mount, then the CP200 will scan from the surface downward. Accordingly, I would recommend starting with the transducer's elements in this position and then adjusting them if needed. Please click here to view a FAQ addressing addressing the maximum distance for SideVision sonar imaging.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] deep water and cp200 - Sallysea - 03-14-18, 05:25 PM
RE: [CA] deep water and cp200 - Chuck - Raymarine - Moderator - 03-15-18 11:09 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)