[CA] [CA11] dragonfly 5 transducer info

[Chuck - Raymarine - Moderator]

mtnbowhunter,

Q1. There is a lot of info on how to cut the transducer mounting bracket to make up for the V angle on a v Hull but nothing about four to aft shimming to get the correct transducer mounting.
A1. No fore-aft compensation / configuration settings nor shims are provided nor should be needed for thru-hull transducers featuring a fairing block. Generally speaking, these transducers are installed on inboard vessels or larger vessels where the transducer will be installed well aft where there is negligible fore-aft rise and a constant deadrise. It should additional be noted that the fore/aft angle of the transducer will vary based on vessel speed and sea conditions.