The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] e120 to RS130
04-05-18, 03:31 PM (This post was last modified: 04-05-18 03:33 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] e120 to RS130
I have acquired 2 e120s and and and a rs130 gps. The e120s are networked together with a DSM300 and work fine, although I am waiting for new transducers to arrive to test it out. I am quite willing to purchase everything I need to connect a SeaTalkNG backbone to the SeaTalk 2 network and I know what I need, but I would like to test the RS130 with the NMEA 0183 network as I have pigtails to fit and I cannot find consistent wiring diagrams. I have a fairly good idea what would work, I am concerned about damage.

RS130 GPS CableNMEA Cable on E120
Yellow to white
Green to Yellow (probably no data on this line)
Shield to Brown and Green to DC -ve
Shield floating if connected to e120 internally
Brown floating
Red to +12V

I would like to know if I am correct
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] e120 to RS130 - Prowler10M - 04-05-18 03:31 PM
RE: [CA] e120 to RS130 - Prowler10M - 04-05-18, 04:05 PM
RE: [CA] e120 to RS130 - Prowler10M - 04-06-18, 09:12 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)