The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / AIS v / [CA] AIS 650 Use With AIS PersonOverBoard Devices

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] AIS 650 Use With AIS PersonOverBoard Devices
04-05-18, 06:04 PM (This post was last modified: 04-06-18 08:48 AM by Chuck - Raymarine - Moderator.)
Post: #1
BBowers Offline
Junior Member
**
 		Posts: 1
Joined: Feb 2018
Reputation: 0
[CA] AIS 650 Use With AIS PersonOverBoard Devices
I have an e7 MFD at the helm and an AIS650 and Ray 260 DSC VHF.

1) Can the system receive signals from life vest AIS Survivor Recovery devices such as the McMurdo Smartfind S20 and display the target on the e7?

2) Can I install an AIS Lifeguard MOB Alarm using the NMEA wires from the AIS650? All the Raymarine gear is on the STng bus, and I would just be feeding the alarm with the NMEA data to alert the offwatch if a single watchstander goes overboard.

Thanks
Bill
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] AIS 650 Use With AIS PersonOverBoard Devices - BBowers - 04-05-18 06:04 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication