The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / RMK-9 / RMK-10 Power button will not switch MFD(s) ON

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RMK-9 / RMK-10 Power button will not switch MFD(s) ON
04-06-18, 12:58 PM
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RMK-9 / RMK-10 Power button will not switch MFD(s) ON
RMK-9 / RMK-10 Power button will not switch MFD(s) ON

While the Power button of a RMK-9 or RMK-10 may be used to switch an a/c/e/gS-Series MFD or Axiom/Axiom Pro MFD OFF, the RMK-9 and RMK-10 are not designed to switch these MFD's ON. Accordingly, these MFDs must be switched ON via their respective Power buttons. Please note that Raymarine MFDs feature a last power state memory feature, permitting the MFD's to be also be switched ON/OFF via the power circuit supplying the MFD(s). To learn more about the MFD's last power state memory feature, click here.


RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
RMK-9 / RMK-10 Power button will not switch MFD(s) ON - Chuck - Raymarine - Moderator - 04-06-18 12:58 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication