The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C90W Connectivity to Standard Horizon MX2200 Matrix
04-04-16, 11:02 AM
Post: #1
C90W Connectivity to Standard Horizon MX2200 Matrix
Saw a thread on old forum regarding an E series. I would like to know which RM Cables,parts, are needed to interface my C90W MFD to my Standard Horizon MX2200 Matrix AIS/DSC VHF?
The Std Horz does not support NEMA2000 , but will support the 0183.
Is this the correct info needed to order parts from RayMarine?

To connect a NMEA 0183 device to a Raymarine STng network you need:

1. ActiSense NGW-1 (converts NMEA 0183 to NMEA 2000),
2. Raymarine A06045 cable (adapts NMEA 2000 to STng)
3. Raymarine STng backbone T (connects A06045 into backbone)
4. Raymarine STng backbone extension cable (enable new T insertion into the backbone)You won't require another backbone terminator, as the network already has two. (You may have to shift the existing terminator though, if you attach the new device to the end of the original backbone, rather than insert it in the middle.


you need a Seatalk NG to NMEA 2000 conversion cable, a NMEA Tee, wire and terminator cap.
Thank you in advance for your help.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
C90W Connectivity to Standard Horizon MX2200 Matrix - Fish220sr - 04-04-16 11:02 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)