Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom 12 X A98 integration
04-16-18, 01:46 PM (This post was last modified: 04-16-18 01:47 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA] Axiom 12 X A98 integration
Welcome to the Raymarine Forum Jazevedo,

Q1. Is there is any way to share the Quantum Radar and Cp470 between these MFDs?
A1. Unfortunately, as these peripherals are designed communicate via Ethernet communication and as a-Series MFDs may not operate within an Ethernet networt which also features MFDs running LightHouse 3 software, this would not be possible. Should two MFDs be desired within the system and each need to to access these same peripherals, then the a98 MFD would need to be replaced with an Axiom MFD. Should the a98 MFD be interfaced to a DownVision or CPT-S transducer, then the a98 would need be replaced with an Axiom DV MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Axiom 12 X A98 integration - Chuck - Raymarine - Moderator - 04-16-18 01:46 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)